Amplifiers

Top Curve

Symbol

	EWIS
	The QE90 Emergency Warning and Intercommunication System (EWIS) is designed to facilitate the orderly evacuation of a building in the event of an emergency.
	(view datasheet)	(pdf)

	EVAC50W24V
	Pertronic Industries' 50W 24V Amplifier is one of a range of amplifiers manufactured by Pertronic Industries. The amplifier generates the evacuation, alert tones and verbal messages. One of four custom tones may also be generated. The EVAC50W24V is capable of driving up to 20W of power via PA loud speakers such as the Pertronic PSS1 and PSSB501.
	(view datasheet)	(view manual)	(pdf)

	EVACGM-EA and EVACGM-ET
	Pertronic Industries' EVACGM Tone Generator Module extends the F100A and F120A analogue addressable automatic fire alarm system by allowing a fully monitored interface between the control panel and a 3rd party 100Vrms amplifier of up to 250W output. Options of 'Evacuate and Alert' ( EVACGM-EA )or 'Evacuate and Test' ( EVACGM-ET ) messages are available. Custom messages and tones are available on request.
	(view datasheet)	(view manual)	(pdf)

	Listen to Custom Tones below. Custom Tones 01 - 47 available on EVACGM-EA, EVACGM-ET and EVAC50W24V
	Available on EVACGM-EA & EVAC50W24V ++ Available on EVACGM-ET only ## EVAC50W24V only Tone 01 AS2220 Evac Tone with Evac Message Tone 02 AS2220 Evac Tone Tone 03 Alert Tone with Alert Message Tone 03 Alert Tone with Evac Message ++ Tone 04 Alert Tone Tone 05 T3 Cadence with Evac Message Tone 06 T3 Cadence Tone 07 Simulated Bell Tone Tone 08 PA400 Tone Tone 09 Simulated Bell Tone (Evac Generator) Tone 09 Claxon (Star Trek) (EVAC50W24V) Tone 10 400-700Hz 1.5 sec whoop Tone 11 800/100Hz @ 1Hz sweeping Tone 12 400/450Hz @ 0.5 Hz tone Tone 13 2400/2900Hz 7 Hz - sweeping Tone 14 2400/2900Hz 1 Hz - sweeping Tone 15 500/1200Hz @ 1 Hz - sweeping Tone 16 1200/2900Hz @ 2 Hz - alternating Tone 17 2400/2900Hz @ 2 Hz alternating Tone 18 1000 Hz @ 1Hz - intermittent Tone 19 800/1000Hz @ 0.875 Hz - alternating Tone 20 2400 Hz @ 1Hz intermittent Tone 21 800Hz 0.25s on, 1s off - intermittent Tone 22 800Hz - continuous Tone 23 660Hz 150mS on, 150mS off - intermittent Tone 24 544 (100mS) / 440 Hz(400mS) - NF S 32-001 Tone 25 660 Hz 1.8s on, 1.8s off - intermittent	(mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3)	Tone 26 1.4 kHz - 1.6kHz 2Hz Tone 27 660Hz - continuous Tone 28 544Hz / 440 Hz - alternating Tone 29 544 @ 0.875s - intermittent Tone 30 800Hz @ 2Hz - intermittent Tone 31 800 / 1000Hz @ 25Hz - sweeping Tone 32 2400 / 2900 @ 25Hz - sweeping Tone 33 554Hz - continuous Tone 34 440Hz - continuous Tone 35 800 / 100Hz @ 7Hz- sweeping Tone 36 660 / 1200Hz @ 1Hz- sweeping Tone 37 2 Tone Chime 1000/650 Hz Tone 38 745Hz @ 1Hz - intermittent Tone 39 1000 & 2000Hz @ 0.5s alternating Tone 40 1000Hz continuous - PEEER Toxix Gas Tone 41 2000Hz - continuous Tone 42 1200Hz - continuous Tone 43 800Hz/1000Hz @ 4HZ alternating Tone 44 RH3 Tone 500Hz – 1400 Hz @ 5Hz repetition Tone 45 'SOS' in Morse code Tone 46 300Hz - 1400Hz - 300Hz Sweep ## Tone 47 3480Hz 130ms on/off ## Tones available only on EVACGM-EA & EVACGM-ET Tone 47 400-1200Hz sweep 0.5s on 0.5s off (EVACGM-EA) Tone 47 Test message + T3 Cadence (EVACGM-ET) Tone 48 AS2220 Evac Tone (EVACGM-EA) Tone 48 Test message + AS2220 Evac Tone (EVACGM-ET)	(mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3) (mp3)

	EVAC20W24V and EVAC20W24V-T3
	Pertronic Industries' 20W 24V Amplifiers have been designed to generate the evacuation tones and verbal messages in compliance with AS2220 or ISO8201 (T3). The amplifiers are capable of driving up to 20W of power via 100V capacitively coupled loud speakers.
	(view datasheet)	(view installation note)	(pdf)

	EVAC50W24V Preamp Board
	Pertronic Industries' 50W Amplifier Preamp is a piggyback board designed to enable the connection of a public address or fire microphone to the Pertronic Industries 50W Amplifier.
	(view installation note)	(pdf)

	A2055 Preamp Board
	The Redback A2055 Pre-amplifier module may be used to boost the input level to the Pertronic 50W Amplifier Pre-amp board in situations where the microphone is connected at distances too great to operate at microphone level input or where the microphone input is feeding more than four amplifiers.
	(view installation note)	(pdf)

	CO334
	The CO334 is a balanced EWIS Hand Microphone. Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord. Tailored frequency response is 300Hz - 8kHz.

	CO379 & CO376
	The CO379 & CO376 balanced Desk Microphones have a tapered low frequency response for articulate speech reproduction and enhanced clarity.
	(view datasheet)	(pdf)

Bottom Curve