< Back to category

VAD-PC-Ixx

AA Pure White Strobe

This product has been replaced by the WRL-PC-I00.

The VAD-PC-I00 AA Strobe is a loop-powered visual alarm device that plugs in to System Sensor analogue addressable detector bases such as the B501AP.

Each VAD-PC-I00 can be individually activated (addressed) by a fire panel over an analogue addressable loop.

The VAD-PC-I00 is compatible with the optional anti-tamper feature on the B501AP and compatible detector bases. When activated, the anti-tamper feature inhibits unauthorised removal of the alarm device.

The B501AP base has a continuity spring which allows field wiring continuity to be checked without the device plugged in.

The VAD-PC-I00 is independently certified to AS ISO 7240.23:2014, classes C and W (see notes below).

Features

• Addressable visual alarm device
• Suitable for mounting on wall or ceiling
• Plugs in to B501AP and compatible detector bases
• White flash, once every two seconds (0.5 Hz)
• Rotary address switches for loop address configuration
• Up to 99 addresses available
• B501AP base facilitates loop continuity test without VAD-PC-Ixx device plugged in
• Built-in loop isolator
• Compatible with detector base anti-tamper feature
• Independently tested and SAI Global StandardsMark certified to AS ISO 7240.23:2014, classes C and W

Notes:

1. VAD-PC-Ixx strobes cannot be synchronised. In situations where more than one VAD will be visible, VAD-PC-Ixx strobes will not satisfy the requirements of AS 1670.1:2018 section 3.22.4

2. VAD-PC-Ixx strobes are not compatible with the B501AUS detector base. They need the deeper B501AP type.

---

Ordering Information

---

Enquire about this product